sleeve anchor cone-shapped nut

1.Pull out load is higher 15% than others 2.Plastic ring ensure moisture proof environment 4.CE approve.

sleeve anchor cone-shapped nut

Descriptiion:

Material:carbon steel

Assemble:washer,hex nut,plastic ring,thread rod bolt,shell

Coating:Cr6 zinc/Cr3 zinc,3-5 micron,white or yellow

Shell type:all type of hole on shell are available.

Applications: 

Light to medium-duty into concrete,brick and block

Size:

Outer diameter:6mm,8mm,10mm,12mm,16mm,20mm,working length from 25mm to 300mm

Technical information

The Sleeve anchor is constructed of plated carbon steel parts.Each part is zinc plated and assembled into a complete ready-to-use anchor.The anchor consists of threaded stud with an outwardly flared coned-shaped end.A tubular expander sleeve is assembled over the stud and butted against the small diameter of the cone.A washer and flange nut are then assembled on the stud to complete the anchor.The anchor works on a true expansion principle:Tightening of the flange nut pulls the cone-shaped stud end into the expander sleeve,wedging in outward and locking the anchor into the base material.

For further information,please feel free to contact us,we'll support you our best service

Thanks and regards,

Harry Lee

Sales vice-president

Note:the part of here only shows our manufacturing capabilities,if customers have any parts of aimilar manufacturing methods ,please send us the drawings and specifications for our quoatations.

sleeve anchor cone-shapped nut